長臂挖掘機

省時 省力 省財富

（1）每次使用時，應檢查挖掘機加長臂高壓或低壓油管是否有鬆動現象;同時，為小心起見，應隨時檢查其他地方是否漏油，以免因振動造成油管脫落，從而發生故障。

(1) Before each use, first check whether the high-pressure or low-pressure oil pipes of the excavator's extended arm are loose; Meanwhile, as a precautionary measure, it is important to check for oil leaks in other areas at all times to avoid oil pipe detachment caused by vibration and potential malfunctions.

（2）當破碎特別堅硬的物體時，應先從邊緣處開始，不要在同一點上連續敲打超過1min，以防止釺杆燒毀或液壓油過熱。

(2) When crushing particularly hard objects, start from the edge and do not continuously strike at the same point for more than 1 minute to prevent the drill rod from burning or hydraulic oil from overheating.

（3）不要用挖掘機加長臂的護板作為推動重物的工具，由於挖掘裝載機均以小型機為主，其本身重量輕，若以其推重物時，輕則損傷破碎錘，重則造成主機吊臂斷裂，甚發生主機翻車事故。

(3) Do not use the extended arm guard of an excavator as a tool to push heavy objects. As excavators and loaders are mainly small machines, their own weight is light. If they are used to push heavy objects, it can damage the crushing hammer lightly, cause the main crane arm to break, and even cause the main engine to overturn.

（4）在使用挖掘機加長臂進行破碎作業時，釺杆應始終與被破碎物體的表麵保持垂直狀態。並使釺杆緊壓被破碎的物體，破碎後應立即停止破碎錘工作，以防止空打。持續漫無目標的衝擊會造成破碎錘的前體受損及主體螺栓鬆動，嚴重時可傷及主機本身。

(4) When using an excavator with an extended arm for crushing operations, the drill rod should always be perpendicular to the surface of the object being crushed. And make the drill rod tightly press the broken object, and immediately stop the work of the crushing hammer after crushing to prevent empty hitting. Continuous aimless impact can cause damage to the front body of the crushing hammer and loosening of the main bolts, and in severe cases, it can harm the host itself.

（5）進行破碎作用時，勿以搖晃釺杆使用，否則主體螺栓與釺杆均有破裂的可能;勿使破碎錘快速墜下或重擊在堅硬的石塊上，這樣會因受過度衝擊而損壞挖掘機加長臂。

(5) When performing crushing, do not shake the drill rod, otherwise both the main bolt and the drill rod may break; Do not let the hammer fall quickly or hit hard stones, as it may damage the excavator's extended arm due to excessive impact.

（6）勿在水中或泥濘地中進行破碎作業，除釺杆外，挖掘機加長臂的其他部分均不宜浸在水或泥濘中，否則其上的活塞及其他功能相近的零件會因堆積泥漬而造成破碎錘過早損耗。

(6) Do not carry out crushing operations in water or mud. Except for the drill rod, other parts of the excavator's extended arm should not be immersed in water or mud, otherwise the piston and other parts with similar functions on it will cause premature wear and tear of the crushing hammer due to the accumulation of mud stains.

以上就是在拆樓工程中使用挖掘機加長臂所需要注意的幾點事項了，希望可以對大家有所幫助！挖掘機的功能之所以這麽的強大，離不開挖掘機加長臂這些挖掘機配件，保養維護好這些挖掘機加長臂，我們才能更加快速的完成工作。

The above are a few things to pay attention to when using excavators to extend the arm in demolition projects. I hope it can be helpful to everyone! The reason why excavators are so powerful is that they rely on excavator accessories such as extended arms. Only by maintaining and maintaining these excavator extended arms can we complete the work more quickly.

本文由長臂挖掘機友情奉獻.更多有關的知識請點http://www.neuesausbunutan.com真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated to the friendship of the long arm excavator. For more related knowledge, please click on http://www.neuesausbunutan.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned